Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 397

FICN-1006 5 FICN-1006 Message FICON GEPort TID Feature Change failed Xrc TapeWrt TapeRd TinTir DvcAck RdBlkId . Message Type LOG Severity WARNING Probable Cause Indicates that the feature change has failed because the FCIP tunnel ID associated with the FICON tunnel is still active. Recommended Action Disable the applicable FCIP tunnel to make the feature change effective. FICN-1007 Message DevDiskEgr:FICON Selective Reset:Path=0x State=0x stat_array=0x. Message Type LOG Severity ERROR Probable Cause Indicates a Selective Reset from the channel was received as either a normal part of path recovery or the starting sequence in an error case. Recommended Action If there was a job failure associated with this event, contact your vendor's customer support. FICN-1008 Message DevDiskEgr:FICON Purge Path received Path=0x. Message Type LOG Severity ERROR Probable Cause Indicates a FICON Purge Path was received from the channel as a part of path recovery. Recommended Action If there was a job failure associated with this event, contact your vendor's customer support for assistance. Fabric OS Message Reference 375 53-1002749-01