Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 880

5 TRCE-1001 TRCE Messages TRCE-1001 Message Trace dump available! (reason: ). Message Type LOG Severity WARNING Probable Cause Indicates that trace dump files have been generated on the switch or the specified slot. The cause for the dump can be one of the following: • PANICDUMP: Generated by panic dump. • WATCHDOG EXPIRED: Generated by hardware watchdog expiration. • MANUAL: Generated manually by issuing the tracedump -n command. • TRIGGER: Triggered by a specific Message ID generated by CRITICAL RASLog message. Recommended Action Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. TRCE-1002 Message Trace dump automatically transferred to address ' '. Message Type LOG Severity INFO Probable Cause Indicates that a trace dump has occurred on the switch or the specified slot, and the trace dump files were automatically transferred from the switch to the specified FTP server. Recommended Action No action is required. TRCE-1003 Message Trace dump was not transferred due to FTP error. Message Type LOG Severity ERROR Probable Cause Indicates that a trace dump has occurred on the switch or the specified slot, but the trace dump files were not automatically transferred from the switch because of an FTP error such as a wrong FTP address, FTP site is down, and network is down. 858 Fabric OS Message Reference 53-1002749-01