Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 455

FSS-1004 5 FSS-1004 Message Memory shortage. Message Type LOG Severity ERROR Probable Cause Indicates that the system ran out of memory. Recommended Action Execute the memShow command to view memory usage in the switch. For a dual CP system, enable the high availability (HA) state synchronization using the haSyncStart command. For non-bladed systems, restart the switch using the reboot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. FSS-1005 Message FSS read failure. Message Type LOG Severity WARNING Probable Cause Indicates that the read system call to the Fabric OS state synchronization (FSS) device has failed. Recommended Action If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. FSS-1006 Message No FSS message available. Message Type LOG Severity WARNING Probable Cause Indicates that data is not available on the Fabric OS state synchronization (FSS) device. Recommended Action If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 433 53-1002749-01