Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 649

NBFS-1001 5 NBFS Messages NBFS-1001 Message Duplicate E_Port SCN from port in state (). Message Type LOG Severity INFO Probable Cause Indicates a duplicate E_Port state change notification (SCN) was reported. The neighbor finite state machine (NBFSM) states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full Recommended Action No action is required. NBFS-1002 Message Wrong input: to neighbor FSM, state , port . Message Type FFDC | LOG Severity ERROR Probable Cause Indicates the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full If this error occurs repeatedly, then there is a problem in the protocol implementation between two switches. Recommended Action Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is Full, then this message can safely be ignored. Otherwise, run the portDisable and portEnable commands to refresh the port. Fabric OS Message Reference 627 53-1002749-01