Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 35

Commands for displaying and configuring the system message logs 1 IF-MIB: YES BD-MIB: YES SW-TRAP: YES swFault: YES swSensorScn: YES swFCPortScn: YES swEventTrap: YES DesiredSeverity:Informational swFabricWatchTrap: YES DesiredSeverity:Critical swTrackChangesTrap: YES swIPv6ChangeTrap: YES swPmgrEventTrap: YES swFabricReconfigTrap: YES [...] Commands for displaying and configuring the system message logs Table 3 describes commands that you can use to view or configure the system message logs. Most commands require the admin access level. For detailed information on required access levels and commands, refer to the Fabric OS Command Reference. TABLE 3 Commands for viewing or configuring the system parameters and message logs Command Description auditCfg auditDump errClear errDelimiterSet errDump errFilterSet errModuleShow errShow pdShow portErrShow portLogClear portLogDisable portLogDump portLogDumpPort portLogEnable portLogEventShow portLoginShow portLogPdisc portLogReset Configures the audit message log. Displays or clears the audit log. Clears all error log messages for all switch instances on this control processor (CP). Sets the error log start and end delimiter for messages pushed to the console. Displays the entire error log, without page breaks. Use the -r option to show the messages in reverse order, from newest to oldest. Sets an error severity filter for the system console. Displays all the defined error log modules. Displays the entire error log, with page breaks. Use the -r option to show the messages in reverse order, from newest to oldest. Displays the contents of the panic dump and core dump files. Displays the port error summary. Clears the port log. If the port log is disabled, this command enables it. Disables the port log facility. Displays the port log, without page breaks. Displays the port log of the specified port, without page breaks. Enables the port log facility. Displays which port log events are currently being reported. Displays port logins. Sets or clears the debug pdisc_flag. Enables the port log facility. Fabric OS Message Reference 13 53-1002749-01