Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 158

5 AN-1001 AN Messages AN-1001 Message Failed to allocate memory: (). Message Type LOG Severity ERROR Probable Cause Indicates that the specified function has failed to allocate memory. Recommended Action Check memory usage on the switch using the memShow command. Restart or power cycle the switch. AN-1002 Message Failed to initialize; rc = . Message Type LOG Severity ERROR Probable Cause Indicates that the initialization of the "trafd" daemon has failed. Recommended Action Download a new firmware version using the firmwareDownload command. AN-1003 Message Latency bottleneck on port /. pct. of secs. affected. Avg. delay us. Avg. slowdown . Message Type LOG | AUDIT Class FABRIC Severity WARNING Probable Cause For an F_Port, indicates that the attached device is slow in responding to frames going out of the specified port. This latency may be inherent in the device or due to heavy workload on the device. For a long-distance E_Port, may indicate too few credits for the distance. For a non-long-distance E_Port, indicates latency produced by a device downstream of the E_Port and is an indication of back-pressure produced by that latency. 136 Fabric OS Message Reference 53-1002749-01