Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 440

5 FICU-1001 FICU Messages FICU-1001 Message . Message Type LOG Severity ERROR Probable Cause Indicates that one of the configuration management functions have failed. The key variable is a component of the Fabric OS configuration database and is for support use only. The error variable is an internal error number. Recommended Action Execute the haFailover command on the switch if it has redundant control processors (CPs) or reboot the switch. Execute the switchStatusShow command to check if the flash memory is full. If the flash memory is full, execute the supportSave command to clear the core files. FICU-1002 Message : Failed to get RNID from Management Server Domain= rc=. Message Type LOG Severity ERROR Probable Cause Indicates that the fibre connectivity control unit port (FICON-CUP) daemon failed to get the switch request node ID (RNID) from the management server because of a Fabric OS problem. The domain variable displays the domain ID of the target switch for this RNID. The error variable is an internal error number. Recommended Action If this is a bladed switch, execute the haFailover command. If the problem persists, or if this is a non-bladed switch, download a new firmware version using the firmwareDownload command. FICU-1003 Message : FICON-CUP License Not Installed: (). Message Type LOG Severity WARNING Probable Cause Indicates that the fibre connectivity control unit port (FICON-CUP) license is not installed on the switch. Recommended Action Execute the licenseShow command to check the installed licenses on the switch. The switch cannot be managed using FICON-CUP commands until the FICON-CUP license is installed. Contact your switch supplier for a FICON-CUP license. Execute the licenseAdd command to add the license to your switch. 418 Fabric OS Message Reference 53-1002749-01