Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 761

SEC-1300 5 SEC-1300 Message This switch is in VcEncode mode. Security is not supported. Message Type LOG Severity INFO Probable Cause Indicates the switch is set up with VC-encoded mode. Recommended Action Turn off VC-encoded mode before enabling security. SEC-1301 Message This switch is in interop mode. Security is not supported. Message Type LOG Severity INFO Probable Cause Indicates the switch is enabled in interop mode. Recommended Action Disable interop mode using the interopMode command before enabling the Secure Fabric OS feature. SEC-1302 Message This switch does not have all the required PKI objects correctly installed. Message Type LOG Severity INFO Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. Fabric OS Message Reference 739 53-1002749-01