Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 331

FABR-1015 5 FABR-1015 Message FICON Insistent DID max retry exceeded: All E_Ports will be disabled. Switch is isolated. Message Type LOG Severity ERROR Probable Cause Indicates that the application exceeded request domain ID (RDI) requests for the insistent domain ID. All E_Ports are disabled; isolating the specified switch from the fabric. Recommended Action Verify that the insistent domain ID is unique in the fabric and then re-enable the E_Ports. Run the fabricShow command to view the domain IDs across the fabric and the configure command to change the insistent domain ID mode. Refer to the Fabric OS Command Reference for more information on these commands. FABR-1016 Message ficonMode is enabled. Message Type LOG Severity WARNING Probable Cause Indicates that FICON mode is enabled on the switch through a user interface command. Recommended Action No action is required. FABR-1017 Message ficonMode is disabled. Message Type LOG Severity WARNING Probable Cause Indicates that FICON mode is disabled on the switch through a user interface command. Recommended Action No action is required. Fabric OS Message Reference 309 53-1002749-01