Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 870

5 SWCH-1016 SWCH-1016 Message Device FDISC to port . Static persistent PID set and area requested not assigned to the device. Reject FDISC. Message Type LOG Severity INFO Probable Cause Indicates that the static persistent port ID (PID) is set and the area requested is not assigned to the device. Recommended Action This is an N_Port ID virtualization (NPIV) device and the static persistent PID is set on it, though the area cannot be assigned as requested. Remove the static binding to have the device come up with a different area by using the wwnaddress --unbind command. SWCH-1017 Message Device tries to FLOGI to port , reject FLOGI as persistent PID is set on the Loop device. Message Type LOG Severity INFO Probable Cause Indicates persistent port ID (PID) is set and static persistent PID is not supported on loop device. Recommended Action Remove the WWN-PID binding using the wwnaddress --unbind command and re-enable the port. SWCH-1018 Message Device FLOGI to port , Static persistent PID set, Requested area user bound to another port. Reject FLOGI. Message Type LOG Severity INFO Probable Cause Indicates a WWN-PID and port address binding collision. Recommended Action The persistent PID is set on the device and the requested area cannot be assigned because it is user bound to a different port. Remove the WWN-PID binding using the wwnaddress --unbind command or remove the port address binding using the portaddress --unbind command and then re-enable the port. 848 Fabric OS Message Reference 53-1002749-01