Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 183

AUTH-3007 5 Recommended Action Check the connection port for a possible security attack. Check the shared secrets using the secAuthSecret command and reinitialize authentication using the portDisable and portEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-3007 Message Event: , Status: failed, Info: Port disabled due to receiving an authentication reject with code '' and Explanation ''. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates that the specified port was disabled because it received an authentication-reject response from the connected switch or device. The error may indicate that an invalid entity tried to connect to the switch. Recommended Action Check the connection port for a possible security attack. Check the shared secrets using the secAuthSecret command and reinitialize authentication using the portDisable and portEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-3008 Message Event: , Status: failed, Info: Port has been disabled due to authentication failure with code '' and explanation ''. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates that the specified port has been disabled because the connecting switch or device failed to authenticate. The error may indicate that an invalid entity tried to connect to the switch. Recommended Action Check the connection port for a possible security attack. Check the shared secrets using the secAuthSecret command and reinitialize authentication using the portDisable and portEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 161 53-1002749-01