Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 851

SULB-1009 5 TABLE 7 Status messages and status codes (Continued) Status message Status code "Standby CP failed to boot up." 0x6f "Standby CP booted up with new firmware." 0x70 "Standby CP failed to boot up with new firmware." 0x71 "Firmware download has completed successfully on standby CP." 0x72 "Firmware download has started on standby CP. It might take up to 10 minutes. " 0x73 "Firmware download has completed successfully on standby CP." 0x74 "Standby CP reboots." 0x75 "Standby CP failed to reboot." 0x76 "Firmware commit has started on standby CP." 0x77 "Firmware commit has completed successfully on standby CP." 0x78 "Standby CP booted up with new firmware." 0x79 "Standby CP failed to boot up with new firmware." 0x7a "Firmware commit has started on both active and standby CPs." 0x7b "Firmware commit has completed successfully on both active and standby CPs." 0x7c "Firmware commit failed on active CP." 0x7d "The original firmware has been restored successfully on standby CP." 0x7e "Unable to restore the original firmware on standby CP." 0x7f "Standby CP reboots." 0x80 "Standby CP failed to reboot." 0x81 "Standby CP booted up with new firmware." 0x82 "Standby CP failed to boot up with new firmware." 0x83 "There was an unexpected reboot during the firmware download operation. The command is aborted." 0x84 "Standby CP was not responding. The command is aborted." 0x85 "Firmware commit has started on both active and standby CPs. Run the 0x86 firmwareDownloadStatus and firmwareShow commands to see the firmware status." "Firmware commit has started on the local CP. Run the firmwareDownloadStatus 0x87 and firmwareShow commands to see the firmware status." "Firmware commit has started on the remote CP. Run the 0x88 firmwareDownloadStatus and firmwareShow commands to see the firmware status." "Run the firmwareDownloadStatus and firmwareShow commands to see the 0x89 firmware status." "The firmwareDownload command has completed successfully." 0x8a "The original firmware has been restored successfully." 0x8b "Remote CP is restoring its secondary partition." 0x8c "Local CP is restoring its secondary partition." 0x8d Fabric OS Message Reference 829 53-1002749-01