Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 346

5 FABS-1010 FABS-1010 Message : Wrong media_event . Message Type LOG Severity WARNING Probable Cause Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. FABS-1011 Message []:Invalid input state 0x. Message Type LOG Severity ERROR Probable Cause Indicates that an unrecognized state code was used in an internal Fabric OS message for a field-replaceable unit (FRU). Recommended Action Reboot or power cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. FABS-1013 Message []:Unknown blade type 0x. Message Type LOG Severity ERROR Probable Cause Indicates an unrecognized type of blade has been discovered in the system. This may be caused by an incorrect field-replaceable unit (FRU) header, inability to read the FRU header, or the blade may not be supported by this platform or Fabric OS version. Recommended Action Verify that the blade is valid for use in this system and this version of Fabric OS. Reseat the blade. If this is a valid blade and reseating does not solve the problem, replace the blade. 324 Fabric OS Message Reference 53-1002749-01