Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 732

5 SEC-1090 SEC-1090 Message SCC list contains FCS member. Please remove member from the FCS policy first. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. SEC-1091 Message No policy to remove. Message Type LOG Severity ERROR Probable Cause Indicates the specified policy member does not exist or the policy itself does not exist. Recommended Action Verify that the security policy name or member ID is correct. SEC-1092 Message Name not found. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. 710 Fabric OS Message Reference 53-1002749-01