Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 219

C3-1012 5 C3-1012 Message S,P(): Link Timeout on internal port ftx= tov= (>) vc_no= crd(s)lost= complete_loss:. Message Type LOG | FFDC Severity CRITICAL Probable Cause Indicates that one or more credits have been lost on a back-end port, and there is no traffic on that port for two seconds. Recommended Action Turn on the back-end credit recovery to reset the link and recover the lost credits. If credit recovery has already been turned on, the link will be reset to recover the credits and no action is required. C3-1013 Message Multi RDY/Frame Loss detected on Slot , Port () m_rdy(0x)/m_frame(0x). Message Type LOG Severity WARNING Probable Cause Indicates that wait cycles to recover the lost frame or credit are exceeded on the specified port. Recommended Action Turn on the back-end credit recovery to reset the link and recover the lost credits. If credit recovery has already been turned on, the link will be reset to recover the credits and no action is required. C3-1014 Message Link Reset on Port S,P() vc_no= crd(s)lost= trigger. Message Type LOG Severity WARNING Probable Cause Indicates that one or more credits were lost and the link is reset. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. Fabric OS Message Reference 197 53-1002749-01