Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 44

1 Clearing the system message logs 2012/06/19-03:26:44, [SULB-1003], 32, SLOT 4 | CHASSIS, INFO, switch, Firmwarecommit has started. 2012/06/19-03:26:44, [IPAD-1001], 33, SLOT 4 | CHASSIS, INFO, switch, CP/1 IPv6 manual fe80::224:38ff:fe1b:4400 DHCP Off. 2012/06/19-03:29:15, [IPAD-1000], 48, SLOT 4 | CHASSIS, INFO, switch, CP/0 Ether/0 IPv6 autoconf fd00:60:69bc:816:205:1eff:fe84:3f49/64 tentative DHCP Off. [...] NOTE The slot option is not supported on the non-bladed systems. Viewing RASLog messages from Web Tools To view the system message log for a switch from Web Tools, perform the following steps. 1. Launch Web Tools. 2. Select the desired switch from the Fabric Tree. The Switch View displays. 3. Click the Switch Events tab. You can view the switch events and messages in the Switch Events Report displayed. In dual-domain switches, an Event button exists for each logical switch. Only messages relating to that switch (and chassis) will be displayed. Clearing the system message logs This section provides information on clearing the system message logs. These procedures are valid for all the supported platforms. Clearing the system message log To clear the system message log for a particular switch instance, perform the following steps. 1. Log in to the switch as admin. 2. Execute the errClear command to clear all messages from memory. NOTE For products that have a single processor, all error log messages are cleared. For products that have multiple processors, this command only clears the error logs of the processor from which it is executed. 22 Fabric OS Message Reference 53-1002749-01