Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 598

5 IPS-1004 IPS-1004 Message Port Config Mode Mismatch slot () port(ge): current mode is (). Message Type LOG Severity WARNING Probable Cause Indicates that configured port mode is different from the intended use. Recommended Action Change the port configuration (by deleting configured FCIP tunnels or iSCSI sessions) to return the port mode to neutral before attempting to configure the port for a different mode or use. IPS-1005 Message Tunnel Authorization Failure for slot () port(ge) tunnel ID() reason (). Message Type LOG Severity WARNING Probable Cause Indicates that tunnel setup failed because of an authorization failure from the remote side. A reason for such a failure could be a WWN mismatch. Recommended Action Change the tunnel configuration on one side of the tunnel to authorize the remote side to set up the tunnel. IPS-1006 Message Tunnel Configuration Mismatch for slot () port() tunnel ID() reason (). Message Type LOG Severity WARNING Probable Cause Indicates that tunnel setup failed because of a configuration mismatch between the two ends. The reason field indicates the cause for configuration mismatch. Recommended Action Change the tunnel configuration on one side of the tunnel to match that of the other side to set up the tunnel. 576 Fabric OS Message Reference 53-1002749-01