Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 664

5 PDM-1001 PDM Messages PDM-1001 Message Failed to parse the pdm config. Message Type LOG Severity WARNING Probable Cause Indicates that the Parity Data Manager (PDM) process could not parse the configuration file. This may be caused by a missing configuration file during the installation. Recommended Action Execute the firmwareDownload command to reinstall the firmware. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PDM-1002 Message ipcInit failed. Message Type LOG Severity WARNING Probable Cause Indicates that the Parity Data Manager (PDM) process could not initialize the inter-process communication (IPC) mechanism. Recommended Action If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. PDM-1003 Message pdm [-d] -S -s . Message Type LOG Severity WARNING Probable Cause Indicates that a syntax error occurred when trying to launch the Parity Data Manager (PDM) process. Recommended Action Execute the firmwareDownload command to reinstall the firmware. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 642 Fabric OS Message Reference 53-1002749-01