Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 749

SEC-1166 5 Recommended Action Wait a few minutes and try the command again. SEC-1166 Message Non FCS tries to commit failover. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. SEC-1167 Message Another FCS failover is in process. Command terminated. Message Type LOG Severity ERROR Probable Cause Indicates that because another failover is already in progress, this failover attempt cannot proceed. Recommended Action Verify the security event was planned. If the security event was planned, retry fabric configuration server (FCS) failover after the current failover has completed, if this switch should become the primary FCS. If the security event was not planned, take appropriate action as defined by your enterprise security policy. SEC-1168 Message Primary FCS failover is busy. Please retry later. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. Fabric OS Message Reference 727 53-1002749-01