Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 373

FCR-1021 5 3. Use zoning commands on the edge fabrics, to reduce the LSAN zone entries on the edge fabrics. 4. Use the portEnable command on each EX_Port, one at a time, and verify that this error is not reported again. FCR-1021 Message Local LSAN device entries exhausted. Message Type LOG Severity WARNING Probable Cause Indicates that the number of devices created through logical storage area network (LSAN) zones within the MetaSAN exceeds the local LSAN zone database limitations. Recommended Action Remove excess device entries within LSAN zones so that the number of devices is within the range of the local zone database limitations. FCR-1022 Message Local proxy device slot entries exhausted. Message Type LOG Severity ERROR Probable Cause Indicates that resources to persistently store the proxy device slot to the remote world wide name (WWN) have been consumed. Recommended Action Remove the proxy device slots by using the fcrProxyConfig command or limit proxy devices by removing logical storage area network (LSAN) zone entries. FCR-1023 Message Local phantom port WWN entries exhausted. Message Type LOG Severity WARNING Probable Cause Indicates that the number of port World Wide Names (WWNs) detected to be in use exceeds the local port WWN resources. Recommended Action Limit the number of port WWNs required by limiting the remote edge fabric connectivity (which limits the number of translate domains). You can also limit the number of proxy devices for a translate domain (which limits the number of translate domain ports required) by limiting the devices specified in logical storage area network (LSAN) zones. Fabric OS Message Reference 351 53-1002749-01