Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 211

C2-1009 5 C2-1009 Message S,P(): portcfglongdistance vc_translation_link_init = 1 overwrites fill word IDLE. ARB will be used on the link. Message Type LOG Severity WARNING Probable Cause Indicates that the portcfglongdistance vc_translation_link_init 1 command has overwritten the fill word IDLE. Arbitrated loop (ARB) will be used on the link. Recommended Action No action is required. C2-1010 Message S,C: Internal monitoring has identified suspect hardware, blade may need to be reset or replaced: fau1:0x, fau2:0x th2:0x. Message Type LOG Severity CRITICAL Probable Cause Indicates that above-normal errors were observed in hardware that may or may not impact the data traffic. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C2-1012 Message S,P(): Link Timeout on internal port ftx= tov= (>) vc_no= crd(s)lost= complete_loss:. Message Type LOG | FFDC Severity CRITICAL Probable Cause Indicates that one or more credits have been lost on a back-end port, and there is no traffic on that port for two seconds. Recommended Action Turn on the back-end credit recovery to reset the link and recover the lost credits. If credit recovery has already been turned on, the link will be reset to recover the credits and no action is required. Fabric OS Message Reference 189 53-1002749-01