Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 527

FW-1355 5 FW-1355 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of invalid certificates has changed from a value outside of the acceptable range to a value within the acceptable range. This violation indicates that a packet with an invalid certificate has been received from the primary fabric configuration server (FCS). Before a new primary FCS switch sends any configuration data to any switch in the fabric, it first sends its certificate to all the switches in the fabric. The receiving switch has to verify that the sender is the primary FCS switch and its certificate is signed by the Root CA recognized by the receiving switch. This counter keeps track of the number of packets received with invalid certificates. Recommended Action No action is required. FW-1356 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of authentication failures has changed. Authentication failures can occur for many reasons. The switch on the other side may not support the protocol, have an invalid certificate, not be signed properly, or send unexpected packets. The port where authentication fails is segmented. This counter keeps track of the number of authentication failures. Recommended Action Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. FW-1357 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of authentication failures has fallen below the low boundary. Authentication failures can occur for many reasons. The switch on the other side may not support the protocol, have an invalid certificate, not be signed properly, or send unexpected packets. The port where authentication fails is segmented. This counter keeps track of the number of authentication failures. Fabric OS Message Reference 505 53-1002749-01