Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 234

5 CDR-1017 CDR-1017 Message Blade in Slot faulted due to unavailable ports in internal Trunk. Message Type LOG Severity ERROR Probable Cause Indicates that the specified blade is faulted due to unavailable ports in internal trunk. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. CDR-1018 Message Blade in Slot faulted due to Link reset threshold value exceeded. Message Type LOG Severity ERROR Probable Cause Indicates that the specified blade is faulted because the link reset threshold is exceeded. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. CDR-1019 Message S,C: HW ASIC Chip TXQ FID parity error threshold reached type = 0x. Message Type LOG Severity WARNING Probable Cause Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware that may degrade the data traffic. Recommended Action Restart the system at the next maintenance window. 212 Fabric OS Message Reference 53-1002749-01