Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 654

5 NS-1010 NS-1010 Message CSCTL mode enabled on port QoS zoning will be ignored for devices on this port. Message Type LOG Severity WARNING Probable Cause Indicates that class-specific control (CS_CTL) mode has been enabled on the specified port that has devices as members of a quality of service (QoS) zone. Recommended Action Remove the CS_CTL configured devices from the QoS zone. NS-1011 Message NS has detected a failover flag disabled TI zone in a base switch in fabric ID . Message Type LOG Severity WARNING Probable Cause Indicates that a failover-disabled traffic isolation (TI) zone has been detected in a base switch fabric. Recommended Action Enable the failover flag or remove the TI zone with the disabled failover flag because the routing may not be set up correctly. NS-1012 Message Detected duplicate WWPN [] - devices removed with PID 0x and 0x. Message Type LOG Severity WARNING Probable Cause Indicates that the devices with the same World Wide Port Name (WWPN) have been removed from the Name Server database. Recommended Action Verify the device reported with duplicate WWPN. 632 Fabric OS Message Reference 53-1002749-01