Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 194

5 BL-1025 BL-1025 Message All GigE/FCIP/Virtualization/FC Fastwrite ports on the blade in slot will be reset as part of the firmware upgrade. Message Type LOG Severity INFO Probable Cause Indicates that a recent firmware upgrade caused the blade's firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all the Gigabit Ethernet, Fibre Channel over IP (FCIP), virtualization data elements, and FC Fastwrite ports were reset. Recommended Action No action is required. BL-1026 Message Internal port offline during warm recovery, state (0x). Message Type LOG Severity CRITICAL Probable Cause Indicates that an internal port went offline during warm recovery of the switch. The switch will reboot and start cold recovery. Recommended Action Execute the supportSave command and then reboot switch. If the problem persists, replace the switch. BL-1027 Message Blade in slot faulted, boot failed; status 0x 0x 0x. Message Type LOG Severity CRITICAL Probable Cause Indicates that the blade failed to boot properly. Recommended Action Reboot or power cycle the blade using the slotPowerOff and slotPowerOn commands. If the message persists, replace the blade. 172 Fabric OS Message Reference 53-1002749-01