Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 169

AUTH-1011 5 AUTH-1011 Message Failed to register for failover operation: switch error . Message Type LOG Severity WARNING Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1012 Message Authentication is rejected: port explain reason . Message Type LOG Severity WARNING Probable Cause Indicates that the specified authentication is rejected because the remote entity does not support authentication. Recommended Action Verify the hash type, protocol, group, and authentication policy using the authutil --show command. AUTH-1013 Message Cannot perform authentication request message: port , message code . Message Type LOG Severity WARNING Probable Cause Indicates that the system is running low on resources when receiving an authentication request. Usually this problem is transient. The authentication may fail. Recommended Action Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Fabric OS Message Reference 147 53-1002749-01