Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 303

EM-1011 5 EM-1011 Message Received unexpected power down for , but cannot determine if it has power. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the environmental monitor (EM) received an unexpected power-down notification from the specified field-replaceable unit (FRU). However, after four seconds, it cannot be determined if it has powered down or not. Recommended Action Reseat the blade. If the problem persists, replace the blade. EM-1012 Message failed state transition, unit faulted. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that a switch blade or non-bladed switch failed to transition from one state to another. It is faulted. The specific failed target state is displayed in the message. There are serious internal Fabric OS configuration or hardware problems on the switch. Recommended Action Reseat the specified field-replaceable unit (FRU). If the problem persists, restart or power cycle the switch. Execute the diagPost command to make sure that Power-On Self-Test (POST) is enabled; then power cycle the blade by using the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the problem still persists, replace the FRU. EM-1013 Message Failed to update FRU information for . Message Type LOG Severity ERROR Probable Cause Indicates that the environmental monitor (EM) was unable to update the time alive or original equipment manufacturer (OEM) data in the memory of a field-replaceable unit (FRU). Recommended Action If you executed the fruInfoSet command, execute the command again; otherwise, the update is automatically attempted again. If it continues to fail, reseat the FRU. If the problem persists, replace the FRU. Fabric OS Message Reference 281 53-1002749-01