Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 470

5 FW-1051 FW-1051 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has risen above the high boundary. High voltages indicate possible hardware failures. Recommended Action Frequent voltage fluctuations indicate that the SFP is deteriorating. Replace the SFP. FW-1052 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed from a value outside of the acceptable range to a value within the acceptable range. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1053 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity WARNING Probable Cause Indicates that the value of the small form-factor pluggable (SFP) Power on Hours has fallen below the low boundary. Recommended Action Configure the low threshold to 1 so that the threshold triggers an alarm when the value falls to 0 (Out_of_Range). If continuous or repeated alarms occur, replace the SFP before it deteriorates. 448 Fabric OS Message Reference 53-1002749-01