Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 728

5 SEC-1078 SEC-1078 Message No new data to abort. Message Type LOG Severity ERROR Probable Cause Indicates there are no new changes in the defined security policy database that can be aborted. Recommended Action Verify the security event was planned. Verify if there were really any changes to the defined policy database that can be aborted. SEC-1079 Message The policy name is invalid. Message Type LOG Severity ERROR Probable Cause Indicates the policy name entered in the secPolicyCreate, secPolicyActivate, secPolicyAdd, or secPolicyDelete command was invalid. Recommended Action Run the command again using a valid policy name. SEC-1080 Message Operation denied. Please use secPolicyActivate or distribute commands. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. 706 Fabric OS Message Reference 53-1002749-01