Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 305

EM-1017 5 EM-1017 Message Uncommitted WWN change detected. Cold reboot required. Message Type LOG Severity WARNING Probable Cause Indicates that a user did not commit a changed World Wide Name (WWN) value before performing a system restart, power cycle, or firmware download operation. Recommended Action Change and commit the new WWN value. EM-1018 Message CP blade in slot failed to retrieve current chassis type (//0x). Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that there was a failure to read the chassis type from the system. Recommended Action Verify that the control processor (CP) blade is operational and is properly seated in its slot. EM-1019 Message Current chassis configuration option () is not compatible with standby firmware version (Pre 4.4), cannot allow HA Sync. Message Type LOG Severity WARNING Probable Cause Indicates that the current chassis configuration option is not supported by the firmware on the standby control processor (CP). This is true even if the standby CP comes up and is operational. High availability (HA) synchronization of the CPs will not be allowed. Recommended Action Change the chassis configuration option to 1 using the chassisConfig command, or upgrade the firmware on the standby CP to the version running on the active CP. Fabric OS Message Reference 283 53-1002749-01