Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 213

C2-1016 5 C2-1016 Message Port is faulted due to port re-initialization failure on internal Port S,P() with reason . Message Type LOG Severity ERROR Probable Cause Indicates that the specified port failed due to port re-initialization failure. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C2-1017 Message Blade in Slot failed due to unavailability of ports in the internal trunk. Message Type LOG Severity ERROR Probable Cause Indicates that the specified blade failed because of the unavailability of the ports in the internal trunk. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. C2-1018 Message Link reset threshold value exceeded in the link S,P(). Message Type LOG Severity ERROR Probable Cause Indicates that the specified blade is faulted because the link reset threshold value has exceeded. Recommended Action When this error is observed persistently, power cycle the specified blade using the slotPowerOff and slotPowerOn commands. If the problem persists, replace the blade. Fabric OS Message Reference 191 53-1002749-01