Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 729

SEC-1081 5 SEC-1081 Message Entered a name for a DCC policy ID that was not unique. Message Type LOG Severity ERROR Probable Cause Indicates the Device Connection Control (DCC) policy name given in the secPolicyCreate command was the same as another DCC policy. Recommended Action Make sure that the DCC policy name has a unique alphanumeric string, and run the secPolicyCreate command again. SEC-1082 Message Failed to create policy. Message Type LOG Severity ERROR Probable Cause Indicates the security policy was not created because of faulty input or low resources. Recommended Action Use proper syntax when creating policies. If the security database is too large, you must delete other members within the database before adding new members to a policy. SEC-1083 Message Name already exists. Message Type LOG Severity ERROR Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, and then local validation finds the error in the security database. This is a rare occurrence. Recommended Action Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database may not be correctly updated for that specific switch. Fabric OS Message Reference 707 53-1002749-01