Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 149

AG-1018 5 AG-1018 Message Host port should not be connected to port which is configured as N_Port. Message Type LOG Severity ERROR Probable Cause Indicates that an initiator or target port is erroneously connected to a port configured for N_Port operation. Recommended Action Execute the switchShow command to display the status of all ports in the system. Execute the portCfgShow command to display the list of ports currently configured as N_Ports. Make sure the host is connected to an F_port. AG-1019 Message Unable to failover N_Port . No other N_Port in port group: is online. Message Type LOG Severity WARNING Probable Cause Indicates that failover across port groups is not supported. Recommended Action Check whether an alternate N_Port is configured in the specified port group using the ag --pgshow command. AG-1020 Message F_Ports to N_Ports route/mapping has been changed. Message Type LOG Severity INFO Probable Cause Indicates that F_Port-to-N_Port mapping has been changed because the switch has come online or some new N_Ports or F_Ports have come online. Recommended Action Execute the ag --mapshow command to display the updated F_Port-to-N_Port mapping. Fabric OS Message Reference 127 53-1002749-01