Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 650

5 NBFS-1003 NBFS-1003 Message DB_XMIT_SET flag not set in state , input , port . Message Type LOG Severity WARNING Probable Cause Indicates the database transmit set flag was not set for the specified input state on the specified port. Neighbor finite state machine (NBFSM) states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full Recommended Action No action is required. The Fabric OS automatically recovers from this problem. NBFS-1004 Message Wrong input: to neighbor FSM, state , port . Message Type LOG Severity INFO Probable Cause Indicates the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full If this error occurs repeatedly, then there is a problem in the protocol implementation between two switches. Recommended Action Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is Full, then this message can safely be ignored. Otherwise, run the portDisable and portEnable commands to refresh the port. 628 Fabric OS Message Reference 53-1002749-01