Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 548

5 FW-1501 FW-1501 Message Mail overflow cleared - alerts discarded. Message Type LOG Severity INFO Probable Cause Indicates that the mail overflow condition has cleared. Recommended Action No action is required. FW-1502 Message Invalid Email address is configured from pre-7.0.0 config file. Message Type LOG Severity WARNING Probable Cause Indicates that the configuration file has invalid e-mail addresses. Recommended Action Reconfigure a valid e-mail address. FW-1510 Message threshold exceeded(High=). Current value is : Port disabled. Message Type LOG Severity ERROR Probable Cause Indicates that the specified port is now disabled because the link on this port had multiple link failures that exceeded the Fabric Watch threshold on the port. Both physical and hardware problems can cause link failures. Link failures frequently occur due to a loss of synchronization. Link failures also occur due to hardware failures, a defective small form-factor pluggable (SFP), or a faulty cable. Protocol errors indicates CRC sum disparity. Occasionally, these errors occur due to software glitches. Persistent errors occur due to hardware problems. Recommended Action Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then, enable the port using the portEnable command. 526 Fabric OS Message Reference 53-1002749-01