Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 474

5 FW-1120 FW-1120 Message , is between high and low boundaries(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of fabric reconfigurations has changed from a value outside of the acceptable range to a value within the acceptable range. The following occurrences can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to one another. • Two fabrics have joined. • An E_Port has gone offline. • A principal link has segmented from the fabric. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1121 Message , value has changed(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of domain ID changes has changed. Domain ID changes occur when there is a conflict of domain IDs in a single fabric and the principal switch must assign another domain ID to the switch. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1122 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of domain ID changes has fallen below the low boundary. Domain ID changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. A low number of domain ID changes means that the fabric is functioning normally. 452 Fabric OS Message Reference 53-1002749-01