Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 193

BL-1022 5 BL-1022 Message Init Failed: Switch DISABLED because internal ports were not ONLINE, . Message Type LOG Severity CRITICAL Probable Cause Indicates that the switch initiation failed because one or more of the internal ports was not online. The switch is faulted. Recommended Action Reboot or power cycle the switch. Additional fault messages precede and follow this error providing more information. Refer to other error messages for recommended action. If the message persists, replace the switch. BL-1023 Message Blade in slot was reset before blade init completed. As a result the blade is faulted. Message Type LOG Severity CRITICAL Probable Cause Indicates that the blade was reset before the initialization completed. Recommended Action Reboot or power cycle the blade using the slotPowerOff and slotPowerOn commands. If the message persists, replace the blade. BL-1024 Message All ports on the blade in slot will be reset as part of the firmware upgrade. Message Type LOG Severity INFO Probable Cause Indicates that a recent firmware upgrade caused the blade firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all datapath elements were reset. Recommended Action No action is required. Fabric OS Message Reference 171 53-1002749-01