Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 391

FCR-1084 5 FCR-1084 Message The resume retry count is exhausted for the domain . Message Type LOG Severity WARNING Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been the result of this issue. Recommended Action No action is required. FCR-1085 Message HA sync lost as remote CP does not support FCR based matrix. Message Type LOG Severity ERROR Probable Cause Indicates that the remote control processor (CP) has older firmware, which does not support the FCR-based matrix while the local CP has the feature enabled. This is causing the loss of the high availability (HA) synchronization. Recommended Action Disable the FCR-based matrix or upgrade the remote CP. FCR-1086 Message HA sync lost as remote CP does not support 8 Gbps-capable FC based EX_Ports. Message Type LOG Severity ERROR Probable Cause Indicates that the remote control processor (CP) has older firmware, which does not support 8 Gbps-capable FC based EX_Port. This is causing the loss of the high availability (HA) synchronization. Recommended Action Disable 8 Gbps-capable FC based EX_Ports or upgrade the remote CP. Fabric OS Message Reference 369 53-1002749-01