Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 580

5 HIL-1502 HIL-1502 Message Slot , high temperature (). Unit will be shut down in 2 minutes if temperature remains high. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the temperature of this blade has risen above the critical threshold. This usually follows a high-temperature message. Recommended Action Run the fanShow command to verify all the fans are working properly. Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists, replace the blade. HIL-1503 Message Slot , unit shutting down. Message Type FFDC | LOG Severity CRITICAL Probable Cause Indicates that the temperature of this blade has been above the maximum threshold for at least two minutes. The blade is shut down to prevent damage. This usually follows a high-temperature warning message. Recommended Action Run the fanShow command to verify all the fans are working properly. Make sure that the area is well-ventilated and that the room temperature is within the operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists, replace the faulty blade. HIL-1504 Message System within normal temperature specifications ( C). Message Type LOG Severity INFO Probable Cause Indicates that temperatures in the system have returned to normal. Recommended Action No action is required. 558 Fabric OS Message Reference 53-1002749-01