Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 473

FW-1118 5 Recommended Action Verify that the cable is properly connected at both ends. Verify that the small form-factor pluggables (SFPs) have not become faulty. An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting. FW-1118 Message , is below low boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of fabric reconfigurations has fallen below the low boundary. The following occurrences can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to one another. • Two fabrics have joined. • An E_Port has gone offline. • A principal link has segmented from the fabric. A low number of fabric reconfigurations means that the fabric is functioning normally. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. FW-1119 Message , is above high boundary(High=, Low=). Current value is . Message Type LOG Severity INFO Probable Cause Indicates that the number of fabric reconfigurations has risen above the high boundary. The following occurrences can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to one another. • Two fabrics have joined. • An E_Port has gone offline. • A principal link has segmented from the fabric. Recommended Action Verify that all inter-switch link (ISL) cables are properly connected at both ends. Verify that the small form-factor pluggable (SFP) has not become faulty. An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting. Fabric OS Message Reference 451 53-1002749-01