Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 380

5 FCR-1048 Recommended Action No action is required. FCR-1048 Message On EX port () setting port credits failed. Message Type LOG Severity ERROR Probable Cause Indicates that the indicated credit type was not set. Setting port credits failed. Recommended Action Execute the portEnable command. If the problem persists, reboot the switch. If the message persists, collect switch information using the supportSave command, and contact your switch service provider. FCR-1049 Message EX_Port () received an ELP command that is not supported. Message Type LOG Severity ERROR Probable Cause Indicates an incoming exchange link parameter (ELP) command that is not supported. Recommended Action Use the portEnable and portDisable to enable or disable the port. If the problem persists, contact your switch service provider. FCR-1053 Message Port was disabled, . Message Type LOG Severity WARNING Probable Cause Indicates that the specified port was disabled because of a mismatched configuration parameter. Recommended Action Use the specified disable reason to identify a possible configuration parameter mismatch between the EX_Port and the switch at the other end of the link. 358 Fabric OS Message Reference 53-1002749-01