Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 374

5 FCR-1024 FCR-1024 Message Local LSAN zone device entries for edge LSAN exhausted. Message Type LOG Severity WARNING Probable Cause Indicates that the number of devices in a logical storage area network (LSAN) defined in the edge fabric is greater than allowed by the local LSAN zone database limitations. Recommended Action Remove excess device entries from this LSAN zone until the number of devices is within the range of the local LSAN zone database limitations. FCR-1025 Message Local phantom node WWN entries exhausted. Message Type LOG Severity WARNING Probable Cause Indicates that the number of node World Wide Names (WWNs) detected to be in use exceeds the local node WWN resources. Recommended Action Reduce the number of node WWNs required by limiting the remote edge fabric connectivity (which limits the number of translate domains). FCR-1026 Message In slot , Node WWN roll over. Message Type LOG Severity INFO Probable Cause Indicates that the node World Wide Name (WWN) pool has rolled over in the specified slot, and WWN entries not detected to be in use are reused as needed. Recommended Action It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with a large number of logical storage area network (LSAN) devices and fabrics, or there are highly dynamic changes to EX_Port connectivity. WWN conflicts might cause unpredictable behavior in management applications. To avoid WWN conflicts, all EX_Ports attached to fabrics with highly dynamic changes to EX_Port connectivity should be disabled and then re-enabled. 352 Fabric OS Message Reference 53-1002749-01