Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 208

5 BM-1055 BM-1055 Message Firmwaredownload timed-out for AP. Faulting switch. Message Type LOG Severity WARNING Probable Cause Indicates that firmware download on the application processor (AP) blade has failed. Recommended Action Execute the slotPowerOff and slotPowerOn commands or reseat the affected blade. BM-1056 Message AP is not configured. Persistently disabling all ports on the switch. Message Type LOG Severity INFO Probable Cause Indicates that the policy of the specified switch is to persistently disable all ports the first time the AP is detected. This may be caused by one of the following reasons: • The AP was detected for the first time on this switch. • The switch was configured under a different mode. Recommended Action Configure the switch to persistently enable all ports. BM-1058 Message Download of AP firmware failed for the switch. Reissue firmwaredownload to recover. Message Type LOG Severity WARNING Probable Cause Indicates that the automatic firmware upgrade on the application processor (AP) failed because the firmware version running on the AP was detected to be different from the system firmware. Recommended Action Execute the firmwareDownload command to recover the AP. 186 Fabric OS Message Reference 53-1002749-01