Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 860

5 SULB-1032 Recommended Action Wait for the operation to complete. SULB-1032 Message Relocating an internal firmware image on the CP. Message Type AUDIT | LOG Class FIRMWARE Severity WARNING Probable Cause Indicates that the switch has started firmware download to the co-CPU. Recommended Action Wait for the operation to complete. SULB-1033 Message Switch has completed relocating the internal firmware image. Message Type AUDIT | LOG Class FIRMWARE Severity WARNING Probable Cause Indicates that the firmware download process has completed normally on the switch. Recommended Action Run the firmwareShow command to verify the firmware versions. Run the switchShow command to make sure the switch is enabled. SULB-1034 Message Relocation of internal image timed out. Message Type AUDIT | LOG Class FIRMWARE Severity ERROR Probable Cause Indicates that there may be an error caused by the switch initialization issue after the internal image is relocated. It may also be caused by an internal Ethernet issue or by a persistent storage hardware failure. Recommended Action Reboot the switch. This will cause the internal image to be relocated again. Use the firmwareDownloadStatus command to monitor the progress. If the problem persists, contact your switch service provider. 838 Fabric OS Message Reference 53-1002749-01