Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 651

NS-1001 5 NS Messages NS-1001 Message The response for request 0x from remote switch 0x is larger than the max frame size the remote switch can support. Message Type LOG Severity WARNING Probable Cause Indicates that the response payload exceeds the maximum frame size the remote switch can handle. Recommended Action Execute the firmwareDownload command to upgrade the remote switch with Fabric OS v4.3 or later, or Fabric OS v3.2 or later, as appropriate for the switch type, so that it can support GMI to handle frame fragmentation and reassembly. You can also reduce the number of devices connected to the local switch. NS-1002 Message Remote switch 0x has firmware revision lower than 2.2: which is not supported. Message Type LOG Severity WARNING Probable Cause Indicates that the local switch cannot interact with the remote switch because of incompatible or obsolete firmware. Recommended Action Execute the firmwareDownload command to upgrade the remote switch to the latest level of firmware. NS-1003 Message Number of local devices , exceeds the standby can support , can't send update. Message Type LOG Severity INFO Probable Cause Indicates that the Name Server on the standby control processor (CP) has a lower supported capability than the active CP because of different firmware versions running on the active and standby CPs. This means that the active and standby CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will be disruptive. Fabric OS Message Reference 629 53-1002749-01