Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 195

BL-1028 5 BL-1028 Message Switch faulted; internal processor was reset before switch init completed. Message Type LOG Severity CRITICAL Probable Cause Indicates that the switch internal processor was reset before the initialization completed. Recommended Action Reboot or power cycle the switch using the slotPowerOff and slotPowerOn commands. If the message persists, replace the switch. BL-1029 Message All ports on the switch will be reset as part of the firmware upgrade. Message Type LOG Severity INFO Probable Cause Indicates that a recent firmware upgrade caused the switch internal processor firmware to be upgraded and resulted in a cold upgrade. As part of the upgrade, all the datapath elements were reset. Recommended Action No action is required. BL-1030 Message All GigE/FCIP/Virtualization/FC Fastwrite ports on the switch will be reset as part of the firmware upgrade. Message Type LOG Severity INFO Probable Cause Indicates that a recent firmware upgrade caused the switch internal processor firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all Gigabit Ethernet, Fibre Channel over IP (FCIP), virtualization data elements, and FC Fastwrite ports were reset. Recommended Action No action is required. Fabric OS Message Reference 173 53-1002749-01