Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 180

5 AUTH-1046 Recommended Action Check the certificate availability using the secCertUtil show -fcapall command. Install the certificate and reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1046 Message has been successfully completed. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates that the certificate database operation has been updated using the secAuthCertificate command. The values for Operation type can be "set" or "remove". Recommended Action No action is required. AUTH-1047 Message has failed. Message Type AUDIT | LOG Class SECURITY Severity ERROR Probable Cause Indicates that the specified action has failed to update the certificate database using the secAuthCertificate command. The values for Operation type can be "set" or "remove". Recommended Action Execute the secAuthCertificate command again. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 158 Fabric OS Message Reference 53-1002749-01