Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 178

5 AUTH-1040 Recommended Action Correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port using the portEnable command. AUTH-1040 Message Reject authentication on port , because switch authentication policy is set to OFF. Message Type LOG Severity INFO Probable Cause Indicates that the local switch has rejected the authentication because the switch policy is turned off. If the neighboring switch has a strict (ON) switch policy, the port will be disabled due to conflicting configuration settings. Otherwise, the E_Port will form without authentication. Recommended Action If the port is disabled, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch using the portEnable command. If the E_Port has formed, no action is required. AUTH-1041 Message Port has been disabled, because an authentication-reject was received with code '' and explanation ''. Message Type LOG Severity ERROR Probable Cause Indicates that the specified port has been disabled because it received an authentication-reject response from the connected switch or device. The error may indicate that an invalid entity tried to connect to the switch. Recommended Action Check the connection port for a possible security attack. Check the shared secrets using the secAuthSecret command and reinitialize authentication using the portDisable and portEnable commands. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. AUTH-1042 Message Port has been disabled, because authentication failed with code '' and explanation ''. Message Type LOG Severity ERROR Probable Cause Indicates that the specified port has been disabled because the connecting switch or device failed to authenticate. The error may indicate that an invalid entity attempted to connect to the switch. 156 Fabric OS Message Reference 53-1002749-01