Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 201

BL-1050 5 BL-1050 Message Incompatible Blade Processor FPGA version with FOS7.0 firmware in slot= on FX8-24. Contact support for upgrade instructions. Message Type LOG Severity WARNING Probable Cause Indicates that the blade processor field-programmable gate array (FPGA) version with Fabric OS v7.0.0 is incompatible on the FX8-24 blade. Recommended Action Contact your switch service provider for upgrade instructions. BL-1051 Message Incompatible Blade Processor FPGA version with FOS7.0 firmware on 7800. Contact support for upgrade instructions. Message Type LOG Severity WARNING Probable Cause Indicates that the blade processor field-programmable gate array (FPGA) version with Fabric OS v7.0.0 is incompatible on the Brocade 7800 switch. Recommended Action Contact your switch service provider for upgrade instructions. BL-1052 Message Link Reset threshold exceeded in the internal port (slot , port ). No core blade has been faulted because it has only one active core blade. Message Type LOG Severity WARNING Probable Cause Indicates that the internal port in the core blade exceeded the link reset threshold level. Faulting the peer edge blade because there is only one active core blade. Recommended Action Replace the core blade. Fabric OS Message Reference 179 53-1002749-01