Dell Brocade 6520 Message Reference Supporting Fabric OS v7.1.0 - Page 168

5 AUTH-1007 AUTH-1007 Message The proposed authentication protocol(s) are not supported: port . Message Type LOG Severity ERROR Probable Cause Indicates that the proposed authentication protocol types are not supported by the specified local port. Recommended Action Execute the authUtil command to make sure the local switch supports the Fibre Channel Authentication Protocol (FCAP) or Diffie Hellman - Channel Authentication Protocol (DH-CHAP) protocols. AUTH-1008 Message No security license, operation failed. Message Type LOG Severity ERROR Probable Cause Indicates that the switch does not have a security license. Recommended Action Verify that the security license is installed using the licenseShow command. If necessary, reinstall the license using the licenseAdd command. AUTH-1010 Message Failed to initialize security policy: switch , error . Message Type LOG Severity ERROR Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action Reboot or power cycle the switch. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. 146 Fabric OS Message Reference 53-1002749-01